Toyan
2.
Check the power supply
：
•Please confirm that the voltage of 1.5v universal ignition power supply is normal, and full
of electricity
•Please confirm that the voltage of 7.4V CDI starting battery is normal and full of electricity
for gasoline engines
3. Initial Oil Needle Setting：
The prerequisite is adequate lubrication and cooling. The engine is run with very important oil needle settings: The
excess oil not only provides rich lubrication, but also conducts heat from the surrounding metal and further assisted
by the fuel nitro methane. the two-stroke model engines in pre-heating into the cylinder through the crankcase on a
longer trip. But The four-stroke engine, with its intake pipe and carburetor mounted high on the cylinder cap, means
that the rich mixture of cooling fuel and air will flow directly into the cylinder directly.With the help of fan cooling, it
can provide excellent operation experience for every enthusiasts.
Remind!
When leaving the factory, each engine has completed the oil needle setting. If you have misadjusted the oil needle
during the use, it is recommended to adjust the main oil needle to 2.0 laps and the auxiliary oil needle to 1.5 laps. Since
the methanol engine needs to maintain the temperature of the spark plug filament to achieve ignition, when the
engine is in the oil rich state for a long time at low speed, the temperature of the filament will gradually reduce,
To Next Page
Loading...