EasyManua.ls Logo

Toyan Engine FS-S100AT - Engine Starting Procedure

Toyan Engine FS-S100AT
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Toyan
13
resulting in ignition difficulty. Therefore, it is necessary to up the speed for cleaning oil at intervals to avoid oil
enrichment at low speed
Since the four-stroke engine requires a large amount of air intake, it is very important to Set the
throttle-stop screw so that the minimum throttle opening (idle setting) is approximately 1.5mm. For the
use of various engine enthusiasts, do not use strong force to twist the throttle screw to adjust the size of
the throttle opening. but to loosen the throttle screw and then pull the throttle arm to adjust. As shown
in the figure:
4.Start
Remind!
It is important to put the throttle in the right position before starting the engine. It is recommended that the
Loosen the throttle
screw and adjust the
size of the throttle
Please keep the
throttle opening
larger than
1.5mm

Related product manuals