TOYAN
3
notes
This engine is suitable for popular science experiments, model display, model car driving, please do not try to use it for any other purpose beyond the scope of
use.
Follow our recommendations and use the correct screws and nuts to securely mount the engine to your starter.
There will be noise when the engine starts, please buy our matching muffler exhaust pipe or run it in an environment far away from residents, because the noise
of the engine running may make other people feel annoyed.
Safety glasses are strongly recommended.
Take care that the glow plug clips or battery leads do not touch rotating parts. Also check whether the connection of the throttle rocker arm is firm.
For safety, keep all bystanders (especially children) at least 3 meters away when preparing to start the engine.
To stop the engine, close the throttle completely; in an emergency, clamp the fuel delivery line in front of the carburetor to cut off the fuel supply.
Do not attempt to disassemble the flywheel and start the timing pulley.
Do not extend the starter battery cable more than 20 cm. Otherwise, the starting current will be insufficient due to the voltage drop in the internal resistance of the battery wire.
When starting the engine, please do not press the start button for a long time. The maximum time for each button to start is 5 seconds. If it does not start, please
stop the interval for 15 seconds, and then press the start button to start, so as to avoid burning the starter motor and ignition after a long time of starting. line.