TOYAN
54
c foreign objects adhere to the filament or corrode the plug body
d the engine will stall at idle speed
e Power off after the engine starts
At the end of each operation, drain the fuel tank, then energize the glow plugs and try to restart the engine to burn as much
fuel as possible in the fuel tank. Repeat this process until the fuel is cleared from the engine.
Inject some anti-corrosion and appropriate amount of lubricating oil, and briefly start the motor to distribute the
appropriate amount of lubricating oil to each working part. Do not inject this oil into the carburetor nozzle as this may
cause deterioration of the carburetor's O-ring.
Add solid grease to the camshaft and valve tappets to ensure that the camshaft case has enough lubricant every time it runs
Notice!
These maintenance programs will be stored for a period of time and cause corrosion risks or
start-up difficulties. If necessary, you can contact us to deal with them.
Replacement of running parts
After long-term operation, the friction between the various parts of the engine will cause
wear and the matching clearance will be too large.
Good maintenance of stable operation of the engine. When you are using it, the startup is
not flexible, the power is reduced, and the idle speed is unstable. Please feedback your use
process and poor engine performance to your local dealer or TOYAN, we will serve you
wholeheartedly. For the replacement of parts, we will provide professional equipment and an
experienced team to complete. Please do not disassemble the engine without professional
tools to avoid the risk of uncontrollable damage to the engine.
To Next Page
Loading...
