TOYAN
49
Stable operation and adjustment
Notice!
A four-stroke engine has a stronger torque output than a two-stroke engine,
so take appropriate measures during operation.
In order to prolong the service life and improve the performance, we have completed the inspection of each engine at the factory. After receiving the engine, you
need to do the correct running-in and cleaning work. After continuous running-in, the cylinder pressure will gradually increase. Due to the high degree of simulation of
this engine and many various parts, we do not recommend you to disassemble the engine completely. We will provide various effective after-sales services to help you
maintain and use it stably.
Open the hood and add grease. Since the overhead cam is used, please add solid grease to ensure stable
operation and avoid dry friction of the cam. Make sure that the marked points on both pulleys are facing down
at the same time.
2. Power check：
Please confirm that the 7.4V universal power supply voltage is normal and the power storage is full
3. Initial needle setting：
The prerequisite here is adequate lubrication and cooling. The engine is run by a very
important oil needle setting: the excess oil not only provides abundant lubrication; it also
conducts heat from the surrounding metal and is further aided by the nitromethane of the
fuel. Four-stroke engine with intake pipe and carburetor mounted high in the cylinder
head
1. Timing timing belt and camshaft case inspection:
To Next Page
Loading...
