TOYAN
53
Regular cleaning and maintenance
X-Power is a very sophisticated machine, you need to clean it regularly; mainly because during use, the environment is
And the influence of fuel, there will be certain wear and corrosion on various parts of the engine, so our TOYAN will also
provide you with long-term maintenance services. You can also complete the basic cleaning and maintenance yourself.
Carefully clean the carburetor to remove any dust and oil that was previously outside the air intake.
If an air filter is used, make sure the filter is clean and not clogged.
It is recommended to replace the air filter that has been used for more than one hour in time. Carefully remove the contaminated filter element to ensure that dirt
cannot enter the carburetor.Do not disassemble the timing belt, you can use alcohol as a cleaning agent to wipe the belt, do not use corrosive cleaning agent to clean
timing belt to avoid damage.
Glow plugs must be considered as consumables. Glow plugs that have been operated for a long time will not guarantee the normal operation
of the engine. However, through careful use, its life can be extended and engine performance can be maintained, namely:
Use suitable tools for disassembly;
Use fuels with a moderate percentage of nitromethane;
Do not over-tilt the engine and do not leave the battery connected while adjusting;
When to replace the glow plug, in addition to burnout, these conditions also need to be replaced because it no longer provides optimal performance,
such as:
a.The surface of the filament becomes rough and white
b.The filament is curled and deformed
To Next Page
Loading...
