Need help?Do you have a question about the Toyota 1C and is the answer not in the manual?
General| Engine Code | 1C |
|---|---|
| Engine Type | Inline-4 |
| Fuel Type | Diesel |
| Compression Ratio | 23:1 |
| Fuel System | Indirect injection |
| Cooling System | Water-cooled |
| Valvetrain | SOHC |
| Displacement | 1.8 L (1839 cc) |
Explains how to navigate and utilize the manual's features and layout.
Details the standard format and elements of repair procedures presented in the manual.
Mentions that references are kept to a minimum but guides where to find them if required.
Describes how specifications are presented within the text and in appendixes for quick reference.
Explains the meaning and presentation of warnings, cautions, and notes to ensure safe and effective repairs.
Covers troubleshooting and diagnostic procedures for diesel engine problems, starting with general checks.
Focuses on diagnosing issues within the diesel engine's electrical systems, including the glow plug system.
Details troubleshooting steps for diagnosing turbocharger performance issues like lack of power or excessive fuel consumption.
Provides diagnostic procedures for electrical faults related to the turbocharger system, including indicator and warning lights.
Outlines the procedures for performing a standard engine tune-up, covering oil, air filter, and valve clearance checks.
Explains how to measure cylinder compression pressure, including preliminary steps and interpretation of results.
Covers the removal, inspection, and installation procedures for the engine's timing belt components and system.
Details the removal, inspection, and installation procedures for the turbocharger unit itself.
Describes the disassembly, inspection, cleaning, and assembly of the cylinder head and its related components.
Covers the disassembly, inspection, and assembly procedures for the cylinder block and its internal components like pistons and crankshaft.
Provides step-by-step instructions for removing and installing a new fuel filter, including associated components.
Details the inspection and replacement procedures for the fuel filter warning switch.
Covers the removal, testing, disassembly, and installation of the injection nozzles and their holders.
Outlines the removal, disassembly, inspection, adjustment, and installation procedures for the fuel injection pump.
Lists common cooling system problems, their possible causes, and recommended remedies with page references.
Explains how to check coolant level and quality, and outlines the procedure for replacing engine coolant.
Details the components, removal, inspection, and installation procedures for the water pump.
Covers the removal, inspection, and installation procedures for the engine thermostat.
Describes the cleaning, inspection, and disassembly/assembly procedures for the vehicle's radiator.
Details the system circuit, on-vehicle inspection, and component inspection for the electric cooling fan system.
Provides a table listing lubrication system problems, possible causes, remedies, and corresponding page numbers.
Outlines the procedure for checking engine oil quality, level, and pressure using a gauge.
Details the steps for draining engine oil, replacing the oil filter, and refilling with new oil.
Covers the components, removal, disassembly, inspection, and assembly/installation of the oil pump.
Describes the components, removal, inspection, and installation procedures for the oil cooler and relief valve.
Explains the inspection procedures for the oil nozzles and the check valve, including their locations.
Details the Super Glow Type system circuit, component inspection, and related charts for pre-heating.
Lists common starting system problems, their possible causes, and remedies.
Illustrates the electrical circuit diagrams for the starting system, including components like the starter switch and battery.
Covers the starter components, disassembly, inspection, and assembly procedures for various power ratings.
Explains the inspection procedures for the starter relay's continuity and operation.
Lists important safety precautions and checks related to the charging system and battery.
Provides a troubleshooting guide for charging system issues, including causes and remedies for warning light behavior.
Illustrates the electrical circuit diagrams for charging systems with and without IC regulators.
Details procedures for inspecting battery, terminals, fuses, drive belts, and alternator wiring.
Covers the components, disassembly, and inspection/repair procedures for the alternator model (CV, CT, CE).
Details the components, disassembly, and inspection/repair procedures for the alternator model (CM, CR).
Explains the inspection and adjustment procedures for the alternator's voltage regulator and relay components.
Provides inspection procedures for the charge light relay's continuity and operation.
Details the inspection procedures for the engine main relay in specific vehicle models.
Outlines the inspection procedures for the engine main relay in different vehicle models.
Contains detailed mechanical specifications for engine components, including torque values, clearances, and dimensions.
Lists specifications for fuel system components such as injection nozzles, fuel feed pump, and automatic timer settings.
Provides specifications for coolant capacity, radiator relief valve pressure, and thermostat operating temperatures.
Includes specifications for oil pressure, oil pump clearances, and oil capacities.
Lists specifications for starter components, including voltage, current, brush length, and commutator dimensions.
Contains specifications for charging system components like battery gravity, drive belt deflection, alternator output, and regulator voltage.
To Next Page
