7. Using phone features
These features are only available when a handset device (such as your phone) is
connected to the hands-free system.
π Caller ID announcement feature
On an incoming call, the hands-free system announces Call from <Caller ID> if the caller
ID is available. If you receive an incoming call from a number in the hands-free system’s
contact list, the system announces the caller with Call from <name>.
The caller ID announcement feature can be turned o (or on) using the
Caller ID Announcement O (or Caller ID Announcement On) VR command.
ó Note: The hands-free system plays the handset device’s ring tone if supported by the
handset device. Otherwise, the hands-free system generates its own ring tone.
7.1. Answer a call
To answer a call, press the Seek up button.
7.2. Reject a call
To reject a call, press the Seek down button. The system responds: Call rejected.
7.3. Voice answer
An incoming call can be answered using voice with the voice answer feature.
When the voice answer feature is enabled (default setting is enabled), on an incoming
call, the hands-free system announces Call from <Caller ID> Accept? {Yes or No}. Say Yes to
accept the call or No to reject the call
The voice answer feature can be turned on (or o) using the Voice Answer On (or Voice
Answer O) VR command.
ó Note: Voice answer is only available when the Caller ID announcement feature is
enabled (default setting is enabled).
To Next Page
Loading...
