10.9. Use the device list
The devices can be managed using the List Devices command.
List devices
1 Press and hold the Mode button.
The system responds: Phone/Setup menu. {Say a command}.
2 Say List Devices.
The hands-free system begins to list the devices paired: First device <device A>,
next device <device B> , last device <device D>.
If a device is connected to the hands-free system: connected is heard after that device
is listed.
ó Note: To move quickly through the device list, you can say Previous device or
Next device.
Connect a device when listing devices
1 List the devices (see “List devices”).
2 When the device name is played for the device you want to connect, say
Connect Device.
The system responds: Connecting <device name>.
Upon successful completion, the system responds: Connection complete.
Disconnect a device when listing devices
1 List the devices (see “List devices”).
2 When the device name is played for the device you want to connect, say
Disconnect Device.
The system responds: Disconnecting <device name>.
Upon successful completion, the system responds: Disconnection complete.
Remove a device when listing devices
1 List the devices (see “List devices”).
2 When the device name is played for the device you want to connect, say
Remove Device.
The system responds: Removing <device name>. Are you sure?
3 Say Yes.
Upon successful completion, the system responds: Device removed.
To Next Page
Loading...
