EasyManua.ls Logo

Toyota BSM & RCTA - BSM Features; Precautionary for BSM

Toyota BSM & RCTA
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BSM Features
a. BSM primary function is Lane Change Assist (LCA); activated when
driver is driving more than the speed of 16km/h.
b. Icon on side mirrors will lit up when the radar detects any vehicle
approaching on the respective adjacent lane (see picture).
c. When the driver turns ON left/right signal to indicate lane change, the
LED indicator icon will light up and blink rapidly if there is an
approaching vehicle is detected within the range of radar.
> This LCA provides no support for the areas adjacent to the user’s vehicle.
This system may not provide adequate warning for very fast moving
vehicles approaching from the rear.
> The driver is solely responsible for safe driving. Always drive safely; stay
aware and constantly observe surroundings.
>
According to conditions, the system may not function correctly therefore the
driver’s own visual confirmation of safety is necessary.
> LED indicator icons may be difficult to be seen under bright sunlight.
AVANZA - MAY - 2019 - 001
WARNING
Please read this manual for proper operation and keep it for future reference.
3/7
SECTION 3.0
BSM Features
3.0
A
A
B
B

Related product manuals