53
SWAY WARNING SYSTEM
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING SWAY WARNING ALERT
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Standard - Is designed to warn approximately when the front
tire crosses the lane marker.
(1) Press “
” or “ ” switches and select “ (7-in display)” or “
display)” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “
setting screen is displayed.
(3) Press “
” switches and select “Sensitivity” and then press “
the desired setting.
(4) Press “
” to go back to the menu.
Sway warning is a function of the LTA system and is designed to detect swaying
based on the vehicle location in the lane and the driver’s steering wheel operation.
To help prevent swaying, the system alerts the driver using a buzzer sound and a
warning displays on the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.
(1) Press “ ” or “ ” switches and select “ (7-in display)” or “ (12.3-in
display)” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .”
The setting screen is displayed.
(3) Press “
” switches and select “Sway Sensitivity” and then press “ ” to
change the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota “Owner’s Manual” for additional information on the LTA system
operation, settings adjustments, limitations, and precautions before attempting to
use it.
(1) Press “
” or “ ” switches and select “ (7-in display)” or “ (12.3-in
display)” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .”
The setting screen is displayed.
(3) Press “
” switches and select “Sway Warning” and then press “ ” to
change the desired setting.
(4) Press “
” to go back to the menu.
OVERVIEWELECTRIC VEHICLE SYSTEMFEATURES & OPERATIONSTOYOTA SAFETY SENSE
SAFETY &
EMERGENCY FEATURES
The LTA system is displayed when the Multi-Information Display (MID) is
switched to the driving support system information display.
(1) The system displays solid white lines on the Lane Departure Alert indicator
when visible lane markers or the road edge are detected. A lane indicator
flashes orange to alert the driver when the vehicle deviates from its lane.
(2) The system displays outlines on the Lane Departure Alert indicator when
canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met
again, operation of the function is automatically restored. For
Departure Alert may not function on the side(s) where white/yellow lines
not detectable.
MY23_RAV4-PRIME_QRG_V2_ML_0907_PRINT.indd 53 9/13/22 11:46 AM
To Next Page
Loading...
