Toyota RAV4 PRIME 2023 - Page 54

52
ADJUSTING LANE DEPARTURE ALERT SENSITIVITY
TOYOTA SAFETY SENSE
™
The driver can adjust the sensitivity of the Lane Departure Alert function from the
Multi-Information Display (MID) customization screen.
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Standard - Is designed to warn approximately when the front
tire crosses the lane marker.
(1) Press “
” or “ ” switches and select “ (7-in display)” or “ (12.3-in
display)” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press “
” switches and select “Sensitivity” and then press “ ” to change
the desired setting.
(4) Press “
” to go back to the menu.
” or “ ” switches and select “ (7-in display)” or “ (12.3-in
from the Multi-Information Display (MID).
” switches and select “ LTA” and then press and hold “ .”
” switches and select “Sway Sensitivity” and then press “ ” to
” to go back to the menu.
the LTA system and setting adjustments continues in the
regardless of Ignition cycle until changed by the driver or the
” or “ ” switches and select “ (7-in display)” or “ (12.3-in
from the Multi-Information Display (MID).
” switches and select “ LTA” and then press and hold “ .”
” switches and select “Sway Warning” and then press “ ” to
” to go back to the menu.
The LTA system is displayed when the Multi-Information Display (MID) is
switched to the driving support system information display.
(1) The system displays solid white lines on the Lane Departure Alert indicator
when visible lane markers or the road edge are detected. A lane indicator
flashes orange to alert the driver when the vehicle deviates from its lane.
(2) The system displays outlines on the Lane Departure Alert indicator when
lane markers or the road edge are not detected or the function is temporarily
canceled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met
again, operation of the function is automatically restored. For example, Lane
Departure Alert may not function on the side(s) where white/yellow lines are
not detectable.
LANE DEPARTURE ALERT WITH STEERING ASSIST (CONTINUED)
- Vehicles equipped with 12.3-in display -
(2)(1)
MY23_RAV4-PRIME_QRG_V2_ML_0907_PRINT.indd 52 9/13/22 11:46 AM