TP-Link Archer C9 - Manual

Set up Access Point Mode for TP-Link Archer C9
1. Equipment setting
1.1. Connect Wireless to device
1.2. Wireless –turn off main modem
1.3. Connect LAN cable from main modem to Internet port behind AP TP-Link Archer C9
1.4. Turn on main modem
1.5. Turn on AP TP-Link Archer C9
Remarks: because AP TP-Link Archer C9 has set Access Point mode from the factory. If
correctly connected, it’ll be ready to use immediately. To check the settings as following
steps: