Need help?Do you have a question about the TP-Link Archer C24 and is the answer not in the manual?
General| DSL WAN | No |
|---|---|
| Ethernet WAN | Yes |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 433 Mbit/s |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Ethernet LAN (RJ-45) ports | 5 |
| Security algorithms | WEP, WPA, WPA2 |
| Product type | Tabletop router |
| Product color | White |
| Antennas quantity | 4 |
| Processor cores | 1 |
| Output current | 0.6 A |
| Output voltage | 9 V |
| Power source type | AC |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Cables included | LAN (RJ-45) |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 106.7 mm |
|---|---|
| Width | 115 mm |
| Height | 24.3 mm |
Explains how to connect the router to the internet in different modes.
Step-by-step guide to connecting and configuring the router in Wireless Router Mode.
Instructions for transforming the router into an Access Point to extend a wired network wirelessly.
Steps to configure the router to boost existing wireless coverage in Range Extender Mode.
Set up the internet connection type (Dynamic IP, Static IP, PPPoE, L2TP, PPTP).
Configure wireless network name (SSID), security, and encryption.
Download and install the latest firmware to improve router performance and features.
Change the router's login password when operating as a Range Extender.
Solutions for internet connectivity problems after router configuration.
To Next Page
