Archer D7 AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
5
On
There is a device connected to this LAN port, or the LAN port is
sending or receiving data.
(LAN)
Off
There is no device connected to this LAN port.
On
Wireless is enabled. The modem router is working on 2.4GHz/5
GHz radio band.
(Wireless)
Off Wireless is disabled.
On
The network is available with a successful Internet connection.
(Internet)
Off
There is no successful Internet connection or the modem router
is operating in Bridge mode. Please refer to Note 2
for
troubleshooting.
On
ADSL line is synchronized and ready to use.
Flash
The ADSL negotiation is in progress.
(ADSL)
Off
ADSL synchronization fails. Please refer to Note 1
for
troubleshooting.
On
The modem router is powered on.
(Power)
Off
The modem router is off. Please ensure that the power adapter is
connected correctly.
Note:
1. If the ADSL LED is off, please check your Internet connection first. Refer to 2.3 Connecting
the Modem Router for more information about how to make Internet connection correctly. If
you have already made a right connection, please contact your ISP to make sure if your
Internet service is available now.
2. If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off,
please refer to Note 1
. If your ADSL LED is ON, please check your Internet configuration. You
may need to check this part of information with your ISP and make sure everything have been
input correctly.
To Next Page
Loading...
