TP-Link Archer VR2100v User Manual

Set up with videos:
Scan the QR code or visit
https://www.tp-link.com/support/setup-video/
to search for the setup video of your product.
Quick Installation Guide
1. Set up the Modem Router
AC2100 Wireless MU-MIMO
VDSL/ADSL Telephony Modem Router
Archer VR2100v
2. Connect the Phone
Open the registration page on your cordless phone. Press and hold the DECT
button on the modem router for about 3 seconds until the Phone LED
ashes.
A
B
Enter the PIN (Default: 0000) on the cordless phone if required.
Analog Phone
DECT Cordless Phone
DECT
Connect your analog phones to the Phone ports on the modem router's
back panel. You may connect up to two.
Flashing
Phone1 or 2
DECT
Within 1 minute Press for about 3 seconds
DSL
Phone2
Phone1
DECT
Reset
WLAN
WPS
Power On/O
USB
DSL
Phone2
Phone1
DECT
Reset
Power Adapter
Connect the modem router
to the DSL splitter.
For traditional landline phone service
Modem Router
3
Connect the DSL splitter to the phone jack.
Note: If you won’t use the traditional landline phone service, you
can directly connect the modem router to the phone jack.
2
DSL Splitter
Phone Jack
PHONE MODEM
LINE
Push in to turn on the
modem router.
4
1
Attach the antennas.
DECTReset

TP-Link Archer VR2100v Specifications

General

Ethernet WAN	Yes
SIM card slot	No
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1733 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
VPN support	OpenVPN, PPTP VPN, IPSec VPN
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	3
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2
Product type	Tabletop router
Product color	Black
Antennas quantity	4
Output current	2 A
Output voltage	12 V
Power source type	AC
Certification	CE, RoHS
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Cables included	AC, LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	163.7 mm
Width	216 mm
Height	36.8 mm

Summary

Set Up the Modem Router

Connect the Phone

Analog Phone Connection

Connect analog phones to the modem router's back panel. Up to two phones can be connected.

DECT Cordless Phone Setup

Register cordless phones by pressing the DECT button on the modem router.

Configure the Modem Router

Configuration Prerequisites

Gather ISP details and phone information before starting configuration.

Switching to Wireless Router Mode

Steps to switch the modem router to Wireless Router mode if you have an existing modem.

Modem Router LED Status Indicators

Explains the status and indication for Power, DSL, Internet, USB, and Phone LEDs.

Frequently Asked Questions (FAQ)

Provides answers to common issues like accessing the web page, internet access, DSL issues, and password recovery.