TP-Link Archer VR600 Quick Installation Guide

Quick Installation Guide
VR600
AC1600 Wireless Gigabit VDSL/ADSL
Modem Router
1.Connect the Hardware
2.Configure the Modem Router
Phone Cable
Phone Jack Power Adapter
Phone Cable
DSL Splitter
Phone (Optional)
Modem Router
2
Note: The DSL LED takes about 1 to 2
minutes to stabilize.
Power On DSL On
3
LAN2DSL LAN3 LAN4/WAN Power
USB
If you don’t need the phone service, just directly
connect the modem router to the phone jack
with the provided phone cable, then follow steps
4 and 5 to complete the hardware connection.
Push in to turn on
the modem router.
Attach the
antennas.
4
Verify that the following LEDs turn
stable before continuing with the
conguration.
5
1
PHONE
LINE
MODEM
SSIDs (network names) and Wireless Password are on the Wi-Fi Info Card.
Method 2: Via TP-Link Tether App
1. Download the TP-Link Tether app.
or
2. Connect your smartphone to the router.
3. Launch the Tether app and select Archer VR600.
4. Follow the steps to connect to the internet and register the
TP-Link Cloud service.
Scan to download
Device
Local Device
Archer VR600
50-C7-BF-02-EA-DC
Ethernet Cable
LAN2
DSL
LAN3 LAN4/WAN Power
USB1
Method 1: Via Web Browser
1. Connect your device to the router using an Ethernet cable or wirelessly.
SSIDs (network names) and Wireless Password are on the Wi-Fi Info Card.
http://tplinkmodem.net
HighMiddleLow
Let’s Get Started
Conrm Password
New Password
Note: If the login page does not appear, please refer to FAQ > Q1.
2. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.
Create a password and get started.
Now you can enjoy your internet.
Now you can enjoy your internet.
3. Follow the step-by-step instructions to set up an internet connection
and register the TP-Link Cloud service.
Before You Start
1. You'll usually need an internet service username and password,
given to you by your internet service provider (ISP) when you first
signed up with them. If you are unsure, please check with your ISP.
2. Find the Wi-Fi Info Card included in the product packaging. Printed
on the card are your router's default SSIDs (network names) and
wireless password.

TP-Link Archer VR600 Specifications

General

Ethernet WAN	Yes
SIM card slot	No
WAN connection type	RJ-45
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1300 Mbit/s
WLAN data transfer rate (second band)	300 Mbit/s
Output current	2 A
Output voltage	12 V
Power source type	AC
Antennas quantity	3
Antenna gain level (max)	23 dBi
VPN support	PPTP, L2TP, IPSec Passthrough
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
VPN tunnels quantity	10
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2
Supported network protocols	IPv4, IPv6
RJ-11 ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	4
Product type	Tabletop router
Product color	Black, Silver
LED indicators	LAN, Power, WLAN
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45), Phone (RJ-11)
Certification	CE, FCC, RCM, RoHS
Package depth	240 mm
Package width	318 mm
Package height	71 mm
Package weight	1160 g
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	163.8 mm
Width	215.8 mm
Height	37.3 mm