Verify that the following LEDs are
on and stable before continuing
with the configuration.
4
Note: The DSL LED takes about
1 to 2 minutes to stabilize.
Power On OnDSL
Quick Installation Guide
AC1900 Wireless Gigabit
VDSL/ADSL Modem Router
7106505928 REV1.0.1
Connecting the Hardware
DSL Splitter
Phone Jack
Connect to the phone (Optional)
Power Adapter
If you don’t need the phone service, just directly connect the modem router
to the phone jack with a phone cable, then follow steps 3 and 4 to complete
the hardware connection.
1 Connect the DSL splitter
to the phone jack.
2 Connect the modem router
to the DSL splitter.
Modem Router
3 Turn on the modem router.
To Next Page
