30
Chapter 6
Wireless Settings
• To change the security option:
1. Go to
Advanced > Wireless > Wireless Settings.
2. Select an option from the
Security drop-down list. We recommend you don’t change
the default settings unless necessary.
• To change the transmit power:
1. Go to
Advanced > Wireless > Wireless Settings.
2. Select an option from the
Transmit Power drop-down list: High, Middle or Low. The
default and recommended setting is
High.
• To change channel settings:
1. Go to
Advanced > Wireless > Wireless Settings.
2. Select a
Channel Width (bandwidth) for the wireless network. It is recommended to
just leave it as default.
3. Select an operating
Channel for the wireless network. It is recommended to leave
the channel to
Auto if you are not experiencing the intermittent wireless connection
issue.
For the 6 GHz network, you can select the
Enable PSC checkbox. When PSC (Preferred
Scanning Channel) is enabled, only channels with higher connectivity will be reserved
to ensure 6 GHz device connections.
• To change the transmission mode:
1. Go to
Advanced > Wireless > Wireless Settings.
2. For the 2.4 GHz and 5 GHz networks, disable
Smart Connect, then select a transmission
Mode according to your wireless client devices. It is recommended to just leave it as
default.
The 6 GHz network only supports 802.11ax mode, which cannot be changed.
6. 2. Schedule Your Wireless Function
The wireless network can be automatically off at a specific time when you do not need
the wireless connection.
1. Visit
http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > Wireless > Wireless Schedule.
3. Enable the
Wireless Schedule feature.
To Next Page
Loading...
