TP-Link AXE5400 - Page 76

72
Chapter 13
VPN Server
2. Go to Advanced > VPN Server > PPTP, and tick the Enable box of PPTP.
Note: Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router’s WAN port and synchronize your System Time with internet.
3. In the Client IP Address field, enter the range of IP addresses (up to 10) that can be
leased to the devices by the PPTP VPN server.
4. Set the PPTP connection permission according to your needs.
• Select
Allow Samba (Network Place) access to allow your VPN device to access
your local Samba server.
• Select
Allow NetBIOS passthrough to allow your VPN device to access your
Samba server using NetBIOS name.
• Select
Allow Unencrypted connections to allow unencrypted connections to
your VPN server.
5. Click
SAV E .
6. Configure the PPTP VPN connection account for the remote device. You can create
up to 16 accounts.
1 ) Click .
2 ) Enter the
Username and Password to authenticate devices to the PPTP VPN
Server.