21
Chapter 4
Set Up Internet Connection
2. Go to Advanced > IPv6, and locate the Firewall Rules section.
3. Click Add.
4. Select a service from the drop-down list of Service Type. The Port and Protocol will
be automatically filled in. It is recommended to keep the default Port and Protocol if
you are unsure about which to use. If the service is not listed, please manually enter
the Service Type, and specify the Port and Protocol.
5. Specify a Service Name for the rule.
6. In the Internal IP field, enter a valid IPv6 address to run the service. You can click Select
from clients, choose a local host device, and its IPv6 address will be automatically
filled in as the Internal IP.
7. Click SAVE , and the newly created IPv6 firewall rule will appear in Firewall Rules.
To Next Page
Loading...
