TP-Link Deco X50-4G - Install LTE External Antennas

12
Before You Start
• Make sure your antennas frequency supports the working frequency of Deco X50-4G listed below.
E-UTRA Operating Band
Uplink (UL) operating band
BS receive
UE transmit
Downlink (DL) operating band
BS transmit
UE receive
Duplex Mode
FUL_low – FUL_high FDL_low – FDL_high
1 1920 MHz – 1980 MHz 2110 MHz – 2170 MHz FDD
3 1710 MHz – 1785 MHz 1805 MHz – 1880 MHz FDD
5 824 MHz – 849 MHz 869 MHz – 894MHz FDD
7 2500 MHz – 2570 MHz 2620 MHz – 2690 MHz FDD
8 880 MHz – 915 MHz 925 MHz – 960 MHz FDD
20 832 MHz – 862 MHz 791 MHz – 821 MHz FDD
28 703 MHz – 748 MHz 758 MHz – 803 MHz FDD
38 2570 MHz – 2620 MHz 2570 MHz – 2620 MHz TDD
40 2300 MHz – 2400 MHz 2300 MHz – 2400 MHz TDD
41 2550 MHz – 2650 MHz 2550 MHz – 2650 MHz TDD
• Two SMB to SMA adapters are provided in the product package of your Deco. Make sure your antennas have the same connector type (SMA Male).
Install LTE External Antennas
When working in 3G/4G Router mode, you can install LTE external antennas (not included in the product package) manually to strengthen the LTE
signals of your Deco.