45
Change the operation mode.
Tip: You can enable 3G/4G Backup when you
switch the network to Wireless Router mode. Refer
to 3G/4G Backup (for Wireless Router Mode) for
details.
Enable to use external antennas
instead of the internal ones.
Note:
This feature is available only when Deco works
in 3G/4G mode. Make sure you have installed
two external antennas to ensure that Deco's LTE
network works properly.
Set connection alerts to receive
notications once the clients
connect to or disconnect from Deco.
Set notications to receive alerts in
the notication bar.
To Next Page
Loading...
