TP-Link EAP320 Installation Guide

5
English
3
Secure the mounting bracket to the wall
by driving the self-tapping screws into the
anchors. Make sure that the shoulders of the
mounting bracket are on the outside.
4
Connect the Ethernet cable to the ETHERNET
port on the EAP and attach the EAP to the
mounting bracket.
5
Push the EAP along the direction of arrows
until it locks into place, and then adjust the
cable to make the exposed part hidden behind
the EAP.

TP-Link EAP320 Specifications

General

Brand	TP-Link
Model	EAP320
Category	Wireless Access Point
Language	English