TP-Link ER7212PC - User Manual

Installation Guide
Hardware Connection
13
Hardware Overview
1
Hardware Overview
2
© 2022 TP-Link 7106509940 REV1.0.1
Package Contents
1
Note: The image may dier from the actual product.
Front Panel
Connect via ber network
Connect via Ethernet
Back Panel
Fiber-Optic Cable
Optical Module
Connect to RJ45 WAN Port
Connect to SFP WAN Slot
Router
Installation Guide
Rubber Feet
Power Adapter
Omada Gigabit VPN Router
with PoE+ Ports and Controller Ability
Modem
Internet
Internet
Green On: The port is supplying power normally.
Green Flashing: Overload or short circuit is detected.
O: Not providing PoE power on the port.
PoE
(Port 5-12)
Speed
(Port 5-12)
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Amber On: Running at 100/10 Mbps, but no activity.
Amber Flashing: Running at 100/10 Mbps and transmitting or receiving data.
O: No device is linked to the corresponding port.
Green On: Running at 1000 Mbps, but no activity.
Green Flashing: Running at 1000 Mbps and transmitting or receiving data.
Amber On: Running at 100/10 Mbps, but no activity.
Amber Flashing: Runni
ng at 100/10 Mbps and transmitting or receiving data.
O: No device is linked to the corresponding port.
Link/Act
(Port 3-4)
Green On: Connecting to a device but no activity.
O: No device connected to the corresponding port.
Flashing: Transmitting or receiving data.
Link/Act
(SFP WAN/LAN)
On: The remaining PoE power is ≤ 7 W.
Flashing: The remaining PoE power keeps ≤ 7 W after this LED is on for 2 minutes.
O: The remaining PoE power is > 7 W.
PoE Max
On: The device is bound to a TP-Link ID.
Slow Flashing: The device is connected to cloud but not bound to a TP-Link ID.
Quick Flashing: The device is being reset to its factory default settings.
O: The device is disconnected from cloud.
CLOUD
Flashing: System is running normally.
On/O: System is running abnormally.
SYS
On: Power is on.
O: Power is o.
PWR
LED Indication
Kensington
Security Slot
RESET
Power SocketGrounding Terminal
SFP SlotLED 1 Gbps RJ45 Port
PoE LEDSpeed LED
Kensington Security Slot: Secure the lock (not provided) into the security slot
to prevent the device from being stolen.
RESET: Press and hold the button for 5 seconds, the SYS LED will ash quickly,
indicating the device is being reset to its factory default settings.
Grounding Terminal: The router comes with lightning protection mechanism.
Power Socket: Connect to the power outlet via the provided power adapter.

TP-Link ER7212PC Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
Product color	Black
Housing material	Metal
Output current	2.43 A
Output voltage	53.5 V
Power consumption (typical)	- W
Supported protocols	TCP/IP, DHCP, ICMP, NAT, PPPoE, NTP, HTTP, HTTPS, DNS, IPSec, PPTP, L2TP, SNMP
NAT functionality	Multi-Net NAT; Virtual Server; NAT-DMZ; FTP/H.323/SIP/IPSec/PPTP ALG; UPnP;
Security algorithms	-
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package depth	374 mm
Package width	227 mm
Package height	73 mm
Package weight	1920 g
Combo SFP ports quantity	2
Ethernet LAN (RJ-45) ports	10
Power over Ethernet (PoE) ports quantity	8
Flash memory	4096 MB
Certification	CE, FCC, RoHS
Internal memory	1024 MB
Processor frequency	1200 MHz
Internal memory type	DDR3

Weight and Dimensions

Depth	131 mm
Width	226 mm
Height	35 mm

Summary

Package Contents

Hardware Overview

Front Panel

Overview of the router's front panel, including LEDs and ports.

Back Panel

Details of the router's back panel features like security slot, reset, and power.

Hardware Connection

Connect via Ethernet

Instructions for connecting the router using an Ethernet cable.

Connect via Fiber Network

Steps for establishing a network connection using fiber optics.

Software Configuration

Typical Network Topology

Illustrates a typical network setup and initial configuration steps.

Management Methods

Omada App Management

Guide to managing the network using the Omada mobile application.

Omada Cloud Portal Management

Instructions for remote network management via the Omada Cloud Portal.