16
Chapter 4
Set Up Internet Connection
If your ISP provides an IPv4-only connection or IPv6 tunnel service, permit IPv6
connection by referring to Set Up the IPv6 Tunnel.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Network > Internet.
3. Select your WAN Interface Name (Status should be Connected) and click the (Edit)
icon.
4. Scroll down the page to enable IPv6, and configure the IPv6 parameters.
• Addressing Type: Consult your ISP for the addressing type (DHCPv6 or
SLAAC). SLAAC is the most commonly used addressing type.
• IPv6 Gateway: Keep it as the default setting.
Note:
If your ISP has provided the IPv6 address, click Advanced to reveal more settings.
5. Click OK and IPv6 service is available for your network now.
To Next Page
Loading...
