38
Chapter 6 Customize Your Network
6. 1. Specify Network Mode
This Mobile Wi-Fi supports three modes of network connection: 4G Preferred,
4G Only and 3G Only. If your SIM card supports WCDMA, select 3G Only; if your
SIM card supports FDD-LTE or TDD-LTE, select 4G Preferred or 4G Only as
needed. In general, the 4G network is faster than the 3G one.
1. Open your tpMiFi app and log in with the password you set.
2. Go to Tools > Internet Settings > Network Mode.
3. Select 4G Preferred, 4G Only or 3G Only as needed.
4. Tap Done.
6. 2. Configure APN
6. 2. 1. Configure APN Settings
If you are in a location beyond your mobile carrier’s service area, you may need to
configure the dial-up settings to access the internet provided by a local mobile
carrier.
1. Open your tpMiFi app and log in with the password you set.
2. Go to Tools > Internet Settings > APN Management.
3. Tap
to build an APN profile.
4. Specify a name for the profile and fill in the parameters provided by your
carrier.
To Next Page
Loading...
