TP-Link PHAROS SERIES User Manual

28
• For CPE220/WBS210/WBS510
Note that if you select AP Router as the operation mode, the status of Port0 will change to WAN,
and the management access will be disabled on this port after the process of quick setup. You
can connect to the Port1 of the device or wirelessly to manage it. If your want to manage the
device through Port0, configure the Remote Login IP Address. For details, refer to
6.5. Configure
Web Server
.
In the :$1&RQQHFWLRQ7\SH section, specify the connection type according to your
need and click
Next .
The device supports three types of the WAN connection, including PPPoE , Dynamic IP and Static
IP
. Contact your ISP to confirm your WAN connection type.

TP-Link PHAROS SERIES Specifications

General

Model	PHAROS SERIES
Category	Wireless Access Point
Frequency	5 GHz
Wireless Standards	IEEE 802.11a/n
Operating Temperature	70°C
Management	Web-based
Wireless Security	WPA/WPA2, WPA-PSK/WPA2-PSK, WEP
Interface	10/100M Ethernet
Operating Modes	Access Point, Client, Repeater
Mounting	Pole Mounting