Need help?Do you have a question about the TP-Link PHAROS SERIES and is the answer not in the manual?
General| Model | PHAROS SERIES |
|---|---|
| Category | Wireless Access Point |
| Frequency | 5 GHz |
| Wireless Standards | IEEE 802.11a/n |
| Operating Temperature | 70°C |
| Management | Web-based |
| Wireless Security | WPA/WPA2, WPA-PSK/WPA2-PSK, WEP |
| Interface | 10/100M Ethernet |
| Operating Modes | Access Point, Client, Repeater |
| Mounting | Pole Mounting |
Describes the device's function as a central hub providing wireless access.
Explains the device's use in point-to-point networking to transform wireless to wired signals.
Details accessing internet via WISP and acting as a home router for downstream clients.
Covers acting as a home wireless router with extended range.
Explains extending wireless coverage of an existing network.
Details extending wireless coverage with different SSID/encryption.
Guides on setting up WAN connection types like Static, Dynamic, PPPoE, L2TP, PPTP.
Details configuring LAN settings, including IP address, DHCP server, and IPv6.
Covers NAT, DMZ, Virtual Server, Port Trigger, and UPnP for network traffic.
Focuses on SPI Firewall, Ping Forbidden, and VPN settings (PPTP, L2TP, IPSec).
Explains controlling internet activities of hosts via filtering policies.
Details setting bandwidth limits for ingress and egress traffic.
Explains preventing ARP attacks and IP embezzlement via IP-MAC binding.
Covers setting 802.11 mode, region, channel width, and transmit power.
Guides on setting up client parameters for connecting to a root AP.
Details configuring AP parameters for client connections, including SSID and security.
Explains setting up multiple virtual wireless networks with VLAN tagging.
To Next Page
