TP-Link RE105 - Reboot Your Extender

31
Chapter 5 Manage Your Extender
2. Wait a few minutes for the restore and reboot.
Note: During the restore process, do not power off or reset the extender.
• To reset the extender to factory default settings:
1. Click FACTORY RESTORE to reset the extender.
2. Wait a few minutes for the reset and reboot.
Note:
1. During the reset process, do not power off or reset the extender.
2. We strongly recommend you backup the current configuration settings before resetting the extender.
5. 6. Reboot Your Extender
The Reboot feature cleans the cache to enhance the running performance of the
extender.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools > Reboot.
• To Reboot Manually
Locate the Reboot section and click Reboot.