24
Chapter 5 Customize Your Network
5. 1. Check Internet Status
You can view the internet status of your extender to check whether you have successfully
set up the extended network(s).
1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Network Map to view the internet status of your extender.
• The extender runs normally.
• The extender fails to connect to the host networks. Please go to Wireless >
Connect to Host Network to check whether the host network passwords are
correct. If the problem still exists, relocate the extender closer to the router to
achieve better signal quality.
• The extender is connected to the host networks, but is not transmitting data.
Please check the internet connection of your router.
• The extender is connected to the router abnormally. Please go to Settings >
Network and try setting your extender to obtain an IP address automatically.
Click the icon of the Internet/Router/Range Extender/Clients to view corresponding
information.
To Next Page
Loading...
