TP-Link RE305 - Set Access Control

29
Chapter 5 Customize Your Network
• Select the Manual mode and choose to transmit 2.4GHz band or 5GHz band
only.
4. Click SAVE .
5. 6. Set Access Control
Access Control allows you to permit or block specific devices from accessing the
internet for a specific period.
Note:
Access Control is not available when your range extender is in a OneMesh network, where it automatically synchronizes
network settings from your host router.
1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set
for the extender.
2. Go to Settings > Advanced Settings > Access Control.
3. Enable Access Control.