2. Select your router’s 2.4GHz/5GHz host network and enter its password. Then click Next.
3. Either keep the default SSIDs or customize them for the extended networks, and then click Next.
4. Verify your wireless settings and click Save. The corresponding LED(s) ( ) should turn
on and stay solid.
4. Relocate
1. Plug the extender into an electrical outlet about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your host network.
2. Wait until the LED is lit and solid blue. If not, relocate it closer to the router to achieve better
signal quality
Both extended networks share the same Wi-Fi passwords as those of your host networks, but may
have different wireless network names (SSIDs) if you have customized them during the
configuration.
To Next Page
Loading...
