TP-Link tapo C425 - Mount Solar Panel and Camera KIT; Drill Holes; Mount Bracket; Install the Solar Panel

13
Mount Solar Panel and Camera KIT
The Tapo Solar Panel charges your Smart Wire-Free Indoor/Outdoor Security Camera continuously.
For the setup video, please refer to https://www.tp-link.com/support/setup-video/#cloud-cameras
1. Drill Holes
Stick the mounting template to a solid and
level wall surface. Drill three screw holes
according to the template.
Φ=6 mm (15/64 in.)
2. Mount Bracket
Insert three wall anchors into the holes and
use the mounting screws to ax the solar
panel bracket over the anchors. Then, insert
two screw caps into the upper screw holes.
(√)
(×)
3. Install the Solar Panel
Slide the solar panel onto the mounting
bracket until it clicks into place.
Wall Anchors ×3 + Self-tapping Screws ×3 Screw Caps ×2