TP-Link TD-VG5612 Quick Installation Guide

Phone Jack
Splitter
For VoIP service
For traditional phone service
PHONE
LINE
MODEM
Quick
Installation Guide
300Mbps Wireless N VoIP VDSL/ADSL Modem Router
TD-VG5612
Via Web BrowserMethod 1
2. Configuring the Modem Router
Connect your computer to the modem router (Wired or Wireless).
Or
Wireless
1
Connect wirelessly by using the default
network name (SSID) and password
on the product label printed on the
bottom of the modem router.
Open a web browser on the computer and configure the modem router according to the following main clues.
2
Enter http://tplinkmodem.net or http://192.168.1.1
in the address bar. Type in admin for both the
username and password and click Login.
Note: If the login window does not appear, please refer to
FAQ->Q1.
Note: Per FCC regulations, all Wi-Fi products marketed in the
U.S. must be fixed to the U.S. region only.
a
Login
admin
admin
http://tplinkmodem.net
c
d
b
Choose Quick Setup in the main menu and then click
Next to start the configuration. Select your Region and
Time Zone from the drop-down list, and then click Next.
Region
Back
Next
United Kingdom
(GMT) Greenwich Mean Time; Dublin, Edinburgh, London, Lisbon
Time Zone
Quick Setup-Region and Time Zone
f
g
e
1. Connecting the Hardware
1
2
7106505825 REV1.0.1
Connect the splitter and power adapter as follows. Then press the POWER ON/OFF button.
Please wait for 1 - 2 minutes till Power and DSL LEDs are on, then continue to configure the
modem router.
Select Yes to auto detect your connection type and then click
Next to continue.
Back
Next
Quick Setup-Auto Detection
Yes.
No. I want to configure the Internet connection myself.
Auto-Detect Connection Type:
Enter the parameters provided by your ISP and then
click Next. Here we take PPPoE as an example.
Back
Next
XXXXXX
XXXXXX
XXXXXX
Quick Setup-PPPoE
DSL PVC:
Auto-detection has succeeded!
8/35
Encapsulation Mode:
LLC
Connection Type:
PPPoE
Username:
Password:
Confirm Password:
Enable 3G/4G as a backup solution for Internet access.
Quick Setup-3G/4G
Back
Next
Click Next to continue.
Note: You may rename your wireless network name and create your own
password.
Finish
Quick Setup-Complete
Operation Mode Configuring: Success
WAN Connection Configuring: Success
WAN Connection Releasing: Success
Gateway and DNS Configuring: Success
3G/4G Connection Configuring: Success
Wireless Configuring: Success
Time Zone Configuring: Success
Enjoy!
Now your wired and wireless devices
can connect to the Internet !
Note: If you have changed your
wireless network name and password,
you must sign in with the new
names/passwords to regain access to
the Internet.
Click Save and wait for your settings to
take effect. Click Finish to complete
the setup.
Back
Next
Quick Setup-Wireless
Wireless Network Name:
Password:
TP-LINK_XXXXXX
XXXXXXXX
Channel:
Mode:
Security:
Click Next to continue.
Note: You may enable 3G/4G as a backup method for Internet access.
Wired
Ethernet cable
Enter the Voice parameters provided by your ISP
and then click Next. If needed, tick Advanced
Setup to configure more.
Back
Next
XXXXXX
XXXXXX
XXXXXX
Quick Setup-Voice
Locale Selection:
Phone Number/User ID:
Registrar Address:
Authentication ID:
XXXXXX
Password:
GB-UK
Advanced Setup
*
*
h
Voice Configuring: Success
300Mbps Wireless N VoIP VDSL/ADSL Modem Router
Default Access:
http://tplinkmodem.net
Username: admin
Password: admin
Model: TD-VG5612
Power: 12V 1.5A
Serial
Number
V1.0
XXXXXXXXXXXXX
SSID
TP-LINK_XXXXXX
MAC
Address
XX-XX-XX-XX-XX-XX
Wireless
Password
/PIN
XXXXXXXX

TP-Link TD-VG5612 Specifications

General

Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Ethernet LAN	Yes
Frequency range	2.4 - 2.4835 GHz
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Antenna type	Internal
Antennas quantity	2
Antenna gain level (max)	2.6 dBi
Routing protocols	RIP-1, RIP-2
USB version	2.0
RS-232 ports	0
USB ports quantity	1
Memory card slot(s)	-
RJ-11 ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	4
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Cables included	LAN (RJ-45), Phone (RJ-11)
Certification	RoHS, RCM
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Product color	White
Power source type	AC
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s

Weight and Dimensions

Depth	60 mm
Width	174 mm
Height	130 mm
Weight	- g