Set up the Modem Router
Connect the Phone
Analog Phone
Connect your analog phones to the RJ11 port on the side panel of the modem
router.
B
Enter the PIN (Default: 0000) on the cordless phone if required.
Open the registration page on your cordless phone. Press and hold the DECT
button on the modem router for about 3 seconds until the Phone LED
ashes.
A
DECT Cordless Phone
DECT
Within 1 minute Press for about 3 seconds
Flashing
DECT
Tether App
You can easily manage your network through the TP-Link Tether app. Search for Tether
on the Apple App Store or Google Play, or simply scan the QR code.
Quick Installation Guide
DSL Modem Router
TD-W9960v
*Images may differ from actual product.
RJ-11
TAE
PHONE2
PHONE1
Scan for Tether
Tether
or
Connect the modem
router to the power
socket.
3
Connect the modem router to the
DSL splitter.
2
Verify that the follwoing LEDs turn solid on
before continuing with the conguration.
4
Power On DSL On Wi-Fi On
Note: If the DSL LED does not turn
solid on, please refer to FAQ > Q3.
Modem Router
Power Adapter
PHONE2
PHONE1
Connect the DSL splitter
to the phone jack.
1
DSL Splitter
Phone Jack
PHONE MODEM
LINE
Note: If you won’t use the traditional landline
phone service, you can directly connect the
modem router to the phone jack.
For traditional landline phone service
To Next Page
