TP-Link TG-3468 V4 - Hardware Connection Guide; Prepare Computer for Installation; Install PCI Express Network Adapter; Finalize Hardware Setup and Connection

English
01
1 Hardware Connection
a. Turn o your computer, unplug the power
cable and remove the case panel.
b. Locate an available PCI-E slot and carefully
insert the adapter.
Note: If the bracket is not suitable for your computer,
detach it from the adapter's board and replace it with the
low-prole bracket.
c. Replace the case panel, plug in the power
cable and turn on your computer. Then
connect the Ethernet cable to the adapter.