Figure 3-7 WAN – Dynamic IP
The following items are displayed on this screen:
Dynamic IP
Connection Type:
Select Dynamic IP if your ISP assigns the IP address automatically.
Click <Obtain> to get the IP address from your ISP’s server. Click
<Release> to release the current IP address of WAN port.
Host Name:
Optional. This field allows you to give a name for the r
blank by default.
MTU:
MTU (Maximum Transmissi
on Unit) is the maximum data unit
transmitted by the physical network. It can be set in the range of
576-1500. The default MTU is 1500. It is recommended to keep the
default value if no other MTU value is provided by your ISP.
Get IP Address by
Unicast:
The broadcast requirement may not be supported by a few ISPs.
Select this option if you can not get the IP address from your ISP
even if
with a normal network connection. This option is not
To Next Page
Loading...
