3.3.4.4 Protocol
On this page, you can specify the protocol for routing rules conveniently. A protocol constitutes of the
name and number. The router predefines three commonly used protocols such as TCP, UDP and
TCP/UDP. Moreover, you can also add new protocols as your wish.
Choose the menu Advanced→Load Balance→Protocol to load the following page.
Figure 3-42 Protocol
The following items are displayed on this screen:
Protocol
Name:
Enter a name to indicate a protocol. The name wil
drop-down list of Protocol on Access Rule page.
Number:
Enter the Number of the protocol in the range of 0-255.
List of Protocol
You can view the information of the entries and edit them by the Action buttons.
Note:
The system predefined protocols cannot be configured.
3.3.5 Routing
3.3.5.1 Static Route
Routing is the process of selecting optimized paths in a network along which to send network traffic.
Static Route is a kind of special routing configured by the administrator, which is simple, efficient, and
reliable.
-61-
To Next Page
Loading...
