Figure 3-25 Port VLAN
The following items are displayed on this screen:
Port VLAN
Network:
Displays the current logical network of the physical port.
VLAN:
Select the desired VLAN for the port.
Tips:
● The Port VLAN can only be created among the LAN ports.
● The change of DMZ status will affect the configurations of Port VLAN. You're recommended to
check or reconfigure the Port VLAN if the status of DMZ is changed.
3.2 User Group
The User Group function is used to group different users for unified management, so that you can
perform other applications such as Bandwidth Control, Session Limit, and Access Control etc. on per
group.
3.2.1 Group
On this page you can define the group for management.
Choose the menu User Group→Group to load the following page.
Figure 3-26 Group Configuration
-41-
To Next Page
Loading...
