TP-Link TL-ER6120 - Page 56

Figure 3-33 Port Triggering
The following items are displayed on this screen:
 Port Triggering
Name:
Enter a name for Port Triggering entries. Up to 28 characters can be
entered.
Trigger Port:
Enter the trigger port number or the range of port. Only
when the
trigger port initiate
s connection will all the corresponding incoming
ports open and provide service for the applications, otherwise the
incoming ports will not open.
Trigger Protocol:
Select the protocol used for trigger port.
Incoming Port:
Enter the incoming port number or range of port numbers. The
incoming port will open for follow-up connection after the trigger port
initiates connection.
Incoming Protocol:
Select the protocol used for incoming port.
Status:
Activate or inactivate the entry.
-50-