TP-Link TL-ER6120 - Page 90

Figure 3-60 IPsec Policy
The following items are displayed on this screen:
 General
You can enable/disable IPsec function for the router here.
 IPsec Policy
Policy Name:
Specify a unique name to the IPsec policy. Up to 28 characters
can be entered.
Mode:
Select the network mode for IPsec policy. Options include:
 LAN-to-
LAN: Select this option when the client is a
network.
 Client-to-LAN: Select this option when the client is a host.
Local Subnet:
Specify IP address range on your local LAN to identify which
PCs on your LAN are covered by this policy. It's formed by IP
address and subnet mask.
-84-