EasyManua.ls Logo

TP-Link TL-PA8010P - System; Upgrade Firmware

TP-Link TL-PA8010P
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-PA8010P AV1200 Gigabit Passthrough Powerline Adapter
17
Simple Application Mapping: The group allows you to choose what type of traffic with the highest
user priority you will use your local HomePlug device for by pitching one of the following radios.
Please select the radio type according to your demand.
Advanced Priority Mapping: The group sets VLAN priority to CAP mapping and default priority.
Note that in HomePlug, CAP 3 is the highest priority while CAP 0 is the lowest priority. The values
shown in VLAN Tags Priority are the default settings for the first running.
4.4 System
The System tab window is for some basic settings of the adapter. On this tab window, you can upgrade
the firmware to the latest version, reset the adapter’s settings to the factory defaults and configure all
adapters’ network names.
4.4.1 Upgrade Firmware
Click the Upgrade Firmw
are button to upgrade the version of the firmware for the adapter and the
following dialog will pop up.

Other manuals for TP-Link TL-PA8010P

Related product manuals