-61-
Figure 4-36 Configuration
The following items are displayed on this screen:
¾ General
Disable Bandwidth
Control:
Select this option to disable Bandwidth Control.
Enable Bandwidth
Control all the time:
Select this option to enable Bandwidth Control all the time.
Enable Bandwidth
Control When:
With this option selected, the Bandwidth Control will take effect when the
bandwidth usage reaches the specified value.
¾ Default Limit
Limited Bandwidth:
Default Limit applies only for users that are not constrained by Bandwidth
Control Rules. These users share certain bandwidth with upper limit
configured here. Value 0 means all the remained bandwidth is available to
use.
To Next Page
Loading...
