34
automatically.
¾ Use the following DNS server address: Select this when you set the fixed IP address as the
IP address of DNS server.
z Primary DNS server: Enter the IP address of the primary DNS server.
z Secondary DNS server: Enter the IP address of the secondary DNS server.
)
Note:
1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for
encapsulating Point-to-Point Protocol frames insider Ethernet frames. PPPoE connection is
used mainly with ADSL service where individual users connect to the ADSL transceiver
(modem) over Ethernet work. It also widely used in XDSL (digital affiliate line such as ADSL,
VDSL or SDSL).
2. The IP Camera with Intelligent IP Installer can’t be founded after enabling the PPPoE and
rebooting.
The change of settings will not take effect until the camera is rebooted. Please go to “System ->
Initialize” page and click the Reboot button as show in the figure below after you make some
changes.
To Next Page
Loading...
