EasyManua.ls Logo

TP-Link TL-SC3430 - 3 Gpp

TP-Link TL-SC3430
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
selected 320x240 or 640x480 at the same time.
¾ Quality:
z Auto: The quality and bit rate will be adjusted automatically according to the frame rate.
z Fixed Quality: Select the value of quality among Medium, Good, Delicate and Excellent.
z Fixed Bitrate: Set the bitrate of MJPEG image transmission for a line. You can select one
among 64Kbps, 128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5 Mbps, 2
Mbps, 3 Mbps, 4 Mbps, 5 Mbps, and 6 Mbps.
) Note:
Concerning how to select the suitable image quality for Fixed Quality or Fixed Bitrate, please refer to the
CHAPTER 9. APPENDIX / A. Frame-rate & Bitrate Table.
7.2.5 3GPP
¾ Viewer Authentication:
z On: If the viewer authentication is On, the users will be requested to key-in username and
password when using QuickTime Player to have live viewing.
z Off: If the viewer authentication is Off, you can have live viewing on computer by QuickTime
Player after entering “rtsp://ip:port/video.3gp” on the URL column directly.
¾ Image Size: Image size for 3GPP is 320 x 240 or160 x 120.
¾ Frame Rate: Set the frame rate of the 3GPP image. Choose one between 5 or 10 fps.
¾ Quality:
z Auto: The quality and bit rate will be adjusted automatically according to the frame rate.
z Fixed Quality: This item here can’t be selected.
z Fixed Bitrate: Set the bitrate of 3GPP image transmission for a line. You can select one
among 64Kbps, 48Kbps, 32Kbps, 16Kbps.
¾ IP Interval: It’s the ratio of i-frame & p-frame. You can select one among 1, 5, 10, 15, 30, 60,
and 120. The ratio smaller, the streaming smoother.

Table of Contents

Other manuals for TP-Link TL-SC3430

Related product manuals