58
¾ Remote Path: Type the path to the destination in FTP server up to 64 characters.
¾ Image File Name: Type the file name you want to assign to the files when sending to the FTP
server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underline) for naming.
¾ Suffix: Select a suffix to add to the file name
z Date & time: The date & time suffix is added to the Image file name. The date/time suffix
consists of lower two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits), second (2 digits), and consecutive number (2 digits), thus 14-digit number
is added to the file name.
z Sequence number: A consecutive number of 10 digits between 1 and 4294967295 and two
fixed digits 00 is added to the Image file name.
z Sequence number clear: Click Clear and the suffix of the sequence number returnsto 1.
¾ Alarm
z Motion Detection: Click it on for using Motion Detection function as a sensor. You can set
motion detection function at the motion detection function screen.
) Note:
You can set motion detection at motion detection screen. (Please go “Setting → Advanced →Motion
Detection → Setting”) For more details, you can check Chapter 9.6.
z Audio Detection: Click it on for using Audio Detection function as a sensor. You can set
audio detection function at the audio detection function screen.
) Note:
You can set audio detection at audio detection screen. (Please go “Setting → Advanced →Audio
To Next Page
Loading...
