7
(2) Wall Mount
2.5 Hardware Connection
Before proceeding, confirm that your PC is connected to your router and can access the Internet. Make
sure that your router’s DHCP feature is enabled. If not, please refer to your router’s instruction to enable
it.
For TL-SC3430N, if your router supports WPS (Wi-Fi Protected Setup), you can also use WPS to setup
a wireless connection quickly. You can also choose Wired Connection.
Please connect the Camera according to the following steps.
2.5.1 Method 1: Wired Connection
1. Connect the Camera to the LAN network (Router or Switch) via Ethernet cable.
2. Connect the power adapter cord to the DC In jack.
3. Plug the power adapter into the power outlet.
To Next Page
Loading...
Need help?
General
