76
Use alarm buffer function for recording audio and video file in the IP Camera before and after
disconnected network. After re-connecting, these files will transmit to FTP client, SMTP, and Network
storage. You can set the pre-alarm and post-alarm period up to 5 seconds in Alarm Buffer function
screen.
7.8 Motion Detection
There are three Motion Detection functions as sensors to set for different detecting zones. Each one has
Threshold and Sensitivity inputs which you can adjust to specific zone sequentially. Motion Detection
function can support to FTP Client, SMTP, and Network Storage.
¾ Threshold: It means the extent which the alarm will be triggered. The default value is 50 and
the value range is 0~100. The larger the value, the higher the threshold.
¾ Sensitivity: It means that how often the sensor will scan the image different. The higher
sensitivity it is and the more frequently it scans. The default value is 50 and the value range is
0~100. The larger the value, the higher the sensitivity.
z Motion Detection 1: Click it on for using Motion Detection 1 function as a sensor. You can
adjust and move the detecting zone by using mouse.
z Motion Detection 2: Click it on for using Motion Detection 2 function as a sensor. You can
adjust and move the detecting zone by using mouse.
z Motion Detection 3: Click it on for using Motion Detection 3 function as a sensor. You can
adjust and move the detecting zone by using mouse.
7.9 Audio Detection
The Audio detection has Threshold and Sensitivity inputs which you can adjust sequentially. Audio
Detection function can support to FTP Client, SMTP, Network Storage, and HTTP Event.
To Next Page
Loading...
