Need help?Do you have a question about the TP-Link TL-SF1005D and is the answer not in the manual?
General| MAC address table | 1000 entries |
|---|---|
| Store-and-forward | Yes |
| Maximum data transfer rate | 0.1 Gbit/s |
| Supported data transfer rates | 10/100 Mbps |
| 10G support | No |
| Networking standards | IEEE 802.3u, IEEE 802.3x |
| Copper ethernet cabling technology | 100BASE-TX, 10BASE-T |
| Switch type | Unmanaged |
| Switch layer | - |
| Supported network protocols | CSMA/CD, TCP/IP |
| Power connector | DC-in jack |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Certification | FCC, CE, RoHS |
| Product color | White |
| Heat dissipation | 6.38 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power source | DC |
| Input current | 0.6 A |
| Input voltage | 5 V |
| Power consumption (max) | 1.48 W |
| Package depth | 91 mm |
| Package width | 108 mm |
| Package height | 85 mm |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 69.5 mm |
|---|---|
| Width | 103.5 mm |
| Height | 22 mm |
Provides an overview of the TL-SF1005D/TL-SF1008D/TL-SF1016D 10/100Mbps Desktop Switch.
Explains the naming conventions used for the switches throughout the user guide.
Details the key features of the 10/100Mbps Desktop Switch, including standards and ports.
Step-by-step instructions for placing the switch on a flat desk for proper operation.
Describes the expected LED indicator behavior when the switch is powered on.
Details the front panel layout, including the Power LED and port LEDs.
Describes the rear panel components, including the power socket and network ports.
Guidance on checking the power connection and source if the Power LED is off.
Steps to troubleshoot a non-lit Link/Act LED when a device is connected.
To Next Page
